Neck/Collar 

Unbutton the shirt and spread it out on its back. Pull the collar tight so that any  curve to the collar band becomes straight. Using a cloth measuring tape,  measure from the center of the button to the middle of the buttonhole 

 

Sleeve Length 

Button up the shirt front and cuffs. Lay the shirt down on a flat surface . Pull the  sleeve away from the shirt body so that it is fully extended and laying flat. 

Measure the sleeve length with the help of a cloth measuring tape by beginning  at the seam attaching the sleeve to the shoulder right to the end of the sleeve cuff. 

CHEST

Spread the shirt out on its back so that there are no wrinkles. With the help of  a cloth measuring tape, measure the chest across width just below the area  where the arms meet the body

 

WAIST 

Spread the shirt out on its back so that there are no wrinkles. 

Spread the shirt out on its back so that there are no wrinkles. With the help of  a cloth measuring tape, measure the across width about 8 inch below the  armpit 

BOTTOM

Spread the shirt out on its back so that there are no wrinkles. With the help of  a cloth measuring tape, measure across width at the bottom of the shirt at  place where the shirt front and back are attached 

YOKE 

Measure the yoke with the help of a cloth measuring tape from shoulder  forward line . Measure from the point where the yoke meets the sleeve,  straight across to the same point on the other side. Make sure there are no  wrinkles at time of measuring 

BICEPS/SLEEVE WIDTH

Lay the shirt flat on its back. Spread out the shirt sleeve flat so that there are  no wrinkles. With the help of a cloth measuring tape, measure across from the  bottom of the sleeve, where it meets the body, to the top of the sleeve.

ARMHOLE 

Measure armhole using a cloth measuring tape. Place the tape at the top of  the armhole seam and follow it along its edge. The armhole measurement  should be 1 or 2” bigger than the bicep measurement

CUFF SIZE 

Spread the cuff out flat and with the help of a cloth measuring tape, measure  from the centre of the button to the middle of the buttonhole 

SHIRT LENGTH

Lay the shirt on a flat surface, face down so that the back is visible. With the  help of a cloth measuring tape, measure from the base of the back of the collar  at the point where the yoke meets the neck band and measure till the bottom  end of the shirt.